Lif-Tech Material Handling Fork Lift Service Logo

Same Day Forklift Service

We Respond To Your Material Handling Needs

Planned Maintenance

 

Planned Maintenance is key to insuring a high Return On Investment of your equipment. Your maintenance is only as good as the company which performs that maintenance. Lif-Tech recognizes the importance of a thorough Planned Maintenance Program and its effect to your ROI.

 

 

 

 

Services

 

Internal Combustion

  1. Clean radiator and truck with compressed air.
  2. Clean grease fittings and lubricate.
  3. Change engine oil and filter.
  4. Inspect and clean air filter, replace if needed.
  5. Check transmission oil level, fill if needed.
  6. Check differential oil level, fill if needed.
  7. Check hydraulic system for leaks. Check hydraulic sump level, fill if needed.
  8. Check battery, fill if needed. Clean battery terminals.
  9. Check all linkages, shafts, and levers. Lubricate if needed.
  10. Check cooling system for leaks. Check water pump shaft. Fill radiator if needed.
  11. Check all belts for wear and proper tension.
  12. Check brakes and inching for proper operation and adjustment.
  13. Check brake fluid reservoir, fill if needed.
  14. Check parking brake for proper operation and adjustment.
  15. Check distributor cap, rotor, wires, and spark plug condition.
  16. Check distributor shaft and advance mechanisms.
  17. Check adjustments to timing, carburetor, and governor.
  18. Check steering for proper operation and adjustment. Fill manual box if needed.
  19. Check mast assembly for proper operation and adjustment. Check for stress cracks.
  20. Check wheel and tire condition.
  21. Check exhaust system.
  22. Check all safety devices for proper operation.
  23. Wipe down operator’s compartment.
  24. Clean work area.

 

Electric

  1. Clean truck with compressed air.
  2. Clean grease fittings and lubricate.
  3. Check final drive oil level, fill if needed.
  4. Check hydraulic system for leaks. Check hydraulic sump level, fill if needed.
  5. Check battery, fill if needed.
  6. Check battery connectors.
  7. Check all linkages, shafts, and levers. Lubricate if needed.
  8. Check brakes for proper operation and adjustment.
  9. Check brake fluid reservoir, fill if needed.
  10. Check parking brake and deadman for proper operation and adjustment.
  11. Check speed control system for proper operation and adjustment. Adjust SCR system if needed.
  12. Check motor commutator and brushes if accessible.
  13. Check contactors for proper operation, adjust if needed. Check contacts for wear.
  14. Check power cable condition.
  15. Check steering for proper operation and adjustment. Fill manual box if needed.
  16. Check mast assembly for proper operation and adjustment. Check for stress cracks.
  17. Check wheel and tire condition.
  18. Check all safety devices for proper operation.
  19. Wipe down operator’s compartment.
  20. Clean work area.

 

Conditions

  1. Planned Maintenance to be performed for a period of one year at frequency indicated on other side.
  2. All work to be performed during hours specified on other side.
  3. Additional work not covered by this agreement will be performed only with customer authorization and will be billed at the current labor rate.
  4. No travel time shall be charged for Planned Maintenance or work performed at time of scheduled visit.
  5. A suitable work area must be provided free of space restrictions and safety hazards. Equipment must be made available promptly for service or additional labor charges may apply.
  6. Additions or deletions to this agreement may be made at any time as agreed by both parties.

 

Cancellation of this agreement may be made by either party upon written notice.

 

 

 

 

Lif-Tech Same Day Service Logo (630) 543-8838
1020 Republic Drive, Addison, IL 60101